Coin for Mould Design
by johannplasto | Source: Precious-Plastic-Community-Platform
Implement the Precious Plastic plastic type coin directly into your mold.
Get a good embossing quality.
Never forget to tag the type of plastic on your product.
Step 1 - Order the coins & check
Visit the Precious Plastic bazar and search for "coins" or just hop here:
Check the dimensions.
Step 2 - Design the pocket
Pocket-Diameter a bit bigger than the coin: 20,4mm (2.4mm)
Depth: 2,94mm (2.94mm)
Make sure to add a drilling under the coin if the coin is not inserted at the mould parting surface.
You can also make the pocket-depth smaller, so you will see the ring of the coin better.
Step 3 - Insert & inject
Choose the correct plastic type coin, insert, produce & let the part in the mould cool down.