Download Specifications - PDF
Precious Plastic Sheetpress with updates.

Type: Sheetpress
Version: 4.3
Status: Tested
Sheet - size: 1.20 x 1.20 meter
Based on: PP Eindhoven Sheetpress
Authors PlasticHub S.L. | PrecisousPlastic - Eindhoven | David Basetti - 3D Seed

Features / Changes

  • sheet size : 1.30
  • interlockable
  • interlockable
  • integrated fan for fumes
  • heater blocks with perfect fit for the the cartridge heaters. This garantuees maximum lifetime as well energy savings over the 0.3mm loose fit as in the original.
  • In case you take the dual sheetpress, up to 1.20x2.40m sheets, we supply you with a tested hydraulic system
  • better rails as in v4.0

Type Sheetpress
Version 1
Price new material in NL +/- €2.550
Additional system (Cooling press + table) +/- €860
Weight 450kg (Sheetpress)
Sheetpress Dimension 1620 X 1620 X 1780 mm
Voltage 400V
Power 15kW
Input Flake Size Large, Medium, Small
Max Running Time 8 hours per day
Max temp 300°C
Tested Plastics HDPE, LDPE, PP, PS
Using foils? Yes
Input Between Plates 300mm
Size of Sheet 1200 x 1200 mm
Range of Sheet Thickness 4 - 35mm
Sheets Per Day (12mm) 3
Sheets Per Day with full system (12mm) 10


Low material cost in comparison with market machines, typically 10,000+ for systems that produce sheets greater or equal to 1mx1m.

This is the first press we have seen that transfers heat through conduction alone, not convection or conduction and convection which is the typical heating technique. This makes the heating process faster and more energy efficient than the alternatives on the market.

Can be run by one person, most other systems require two people to operate. No other systems on the market include usability tools meaning multiple people are needed at various steps of the sheet making process for sheets of this size.

With the full system you can heat and press sheets simultaneously which allows you to produce sheets much faster than a standalone Sheetpress which is typically the type of system available on the market.

Ease of build and diversity of molds, the molds we have developed are comparatively simpler and cheaper to make than molds from other systems.


Sheet size 1m x 1m, many manufacturing processes have been designed to work with 1220mm x 1220mm and there are sheet pressing systems available on the market that can produce sheets larger than this system.

Most mid-small workspace machinery only requires 16A but the Sheetpress requires 32A. Compared with other Precious Plastic machines the Sheepress is significantly larger. It does not fit through a standard door or double doors like all the others and requires at least a small garage door to fit it inside.

The machine does not have wheels and is not moveable by human power, so it requires a pallet/pump truck to move. Some other sheet pressing systems come with wheels but we opted not to for stability.

Input & output

Plastic Input

We have successfully pressed sheets from clean HDPE, LDPE, PP and PS. The press can take any type of flakes (small, medium large). We recommend using the large flakes produced from the shredder pro using with the large sieve. Since it reduces the amount of shredding. We have had success in pressing sheets made from non-shredded bottle caps, the melting time just increases slightly with a larger size of input material. Here is a chart to give an overview in different thicknesses, times and temperatures.

⚠️ Important: you cannot press dirty plastic as it will leave burned residue on the mould which is very difficult to remove.

Sheet thickness HDPE
6MM 6.5 KG
40 Min
6.5 KG
40 Min
6.5 KG
40 Min
8MM 8.5 KG
45 Min
8.5 KG
45 Min
8.5 KG
45 Min
10MM 11 KG
50 Min
11 KG
50 Min
11 KG
50 Min
12MM 12 KG
55 Min
12 KG
55 Min
12 KG
55 Min
20MM 22 KG
60 Min
22 KG
60 Min
22 KG
60 Min

Playing with colors

This is where there is room to play. You can basically mix any color as long as it is the same type of plastic. A few variables to play with, the size of the shredded plastic. Small, medium or large flakes will have a different effect. Also using transparent plastic in there gives an interesting layer of depth. More examples on the poster in the downloadkit

Sheetpress colors

How many sheets at a time?

We recommend pressing only one sheet at a time. It may be possible to press more efficiently by melting multiple at a time but we have not figured out how to cool them evenly yet. If you figure out a way, please share it on our online community!

Sheet size

The aluminum pressing plates are 1220x1220mm but there is often an overflow from the mould so we recommend making moulds of 1040mm so that once they have shrunk from cooling they are just over 1m, then the edges can be trimmed to make a perfect 1mx1m square. Thickness can be between 4 to 35 MM.

Useful Links

Build Issues


Build Video

Build Video


Tool / Machine Description Price Category
Forklift If you don't have good crane which can lift up to 200KG up to 1.70m you might look for a forklift. 700 Euro + Assembly
11.75 mm Drill This is needed for the cartridge heater blocks 20 Euro Cartridge Heaters
11.90 mm Drill This is needed for the cartridge heater blocks - for the final pass 20 Euro Cartridge Heaters
Small Drillpress That's a better choice over a hand drill which is getting very hot after 20 M6 holes alone. 250 Euro Press Plate holes
Shop Press This is needed to press cartridge heaters into the blocks. As alternative you try a bigger vise which is faster but may damage the heaters. Ideally you use both. 220 Euro Cartridge Heaters

Table Source

Mini Drill Press
Shop Press
Pressing cartridge heaters


Wiring - 380V

Circuit Diagram